Introducing: ConvaFoam Cutting Guide

1. Cut into a ‘H’-shape dressing by cutting out two small squares.
2. Place the middle of the dressing under the toe, using the longer piece to wrap around the toe.
3. Fold the remaining dressing over the top of the toe and repeat the wrapping process. Use the silicone offcuts to secure.

1. Cut two V shapes out of a small square dressing.

    

2. Apply one half of the dressing to the top of the hand. 
3. Push the remaining half between the fingers and secure on the palm.

Toe application video

1. Cut into a 'H'-shape dressing by cutting out two small squares
2. Place the middle of the dressing under the toe, using the longer piece to wrap around the toe.
3. Fold the remaining dressing over the top of the toe and repeat the wrapping process. Use the silicone offcuts to secure.

1. Fold the dressing in half, and cut four evenly spread slits to in the middle of the dressing.
2. Place the toes through each of the holes, then secure the dressing to the underside of the foot.
3. Pull the dressing tight through to toes and secure to the top of the foot.

1. Cut a square out of the corner of a square dressing to form a ‘V’. Keep the silicone offcuts to secure the dressing after application.
2. Place the heel into the bottom of the ‘V’ on the cut dressing.
3. Wrap the two sides up and around the heel. Use the silicone offcuts to secure.

1. Cut a slit approximately 2/3 through the length of the dressing.
2. Place the slit over the thumb with the smaller portion on the back of the hand.
3. Stick the larger portion of the dressing over the palm, shaping it around the thumb to stick to the smaller section you have already positioned.

1. Cut half way into a small square dressing, then add two additional small cuts to make a ‘Y’-shape.
2. Apply the dressing over the top of the device before securing the sides underneath the tube.